Top 10 Best amp meter 2022

1. Etekcity Digital Clamp Meter Multimeter AC Current and AC/DC Voltage Tester with Amp, Volt, Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600

  • Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
  • Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
  • Additional Features: data hold, max reading, and an easy-to-read large LCD
  • Easily Carrying: comes with a handy carrying pouch, perfect for use while you’re on the go
  • Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation

2. Klein Tools CL220 Digital Clamp Meter, Auto-Ranging 400 Amp AC, AC/DC Voltage, TRMS, Resistance, Continuity, NCVT Detection, and Temp

  • Measures AC current and NCVT via clamp and AC/DC voltage, resistance, and continuity via test-leads, and temperature with thermocouple
  • Non-contact voltage tester integrated into the clamp jaw
  • Backlit LCD for ease of viewing in low light
  • Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
  • Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
  • Measures temperature with a K-Type thermocouple probe
  • Auto-Range, Hold, Data Hold, and Max value

3. Fluke 323 True-RMS Clamp Meter

  • Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure DC current
  • The true RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
  • Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V

4. KAIWEETS Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC/DC Current)

  • True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
  • NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
  • Multi-function: Two-color backlit LCD Display – When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
  • Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.

5. Klein Tools CL390 Digital Clamp Meter, Reverse Contrast Display, Auto Ranging 400A AC/DC, AC/DC Voltage,TRMS, DC Microamps, Temp, NCVT, More

  • Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
  • Non-contact voltage tester integrated into the clamp jaw
  • High-visibility reverse contrast LCD display for improved view ability in all ambient lighting conditions
  • Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
  • Measures AC/DC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple
  • Measures temperature with a K-Type thermocouple probe
  • Max/Min, Rel/Zero and Data Hold capability

6. Klein Tools CL120 Digital Clamp Meter, Auto-Ranging 400 Amp AC, AC/DC Voltage, Resistance, Continuity, Non-Contact Voltage Tester Detection

  • Clamp Meter measures AC current and NCVT via clamp and AC/DC voltage, resistance and continuity via test-leads
  • Non-contact voltage tester integrated into the clamp jaw
  • Backlit LCD for ease of viewing in low light
  • Auto ranging measurements
  • Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands-free operation
  • Durable, multifunction meter
  • Auto-Range, Hold, Data Hold, and Max value

7. bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt

  • Test range: Voltage: DC 6.5~100V; Current: 0~100A; Power: 0~10kW; Energy: 0~9999kWh
  • Store energy data when power off (can be reset to 0). The blue backlight can be turned on/off manually
  • With overload alarm function (If active power is larger than threshold, backlight and power value will flash)
  • 4 in 1 meter; Large-screen LCD (displays voltage, current, active power, energy at the same time)
  • Note: Only display and shunt are included. It doesn’t include any wire or accessories

8. KAIWEETS Clamp Meter 1000A True RMS AC Current Amp Meter, Inrush, VFD, LOZ Mode, 6000 Counts, Measures Current AC/DC Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle

  • True-RMS Clamp Meter: This multimeter can accurately measure AC Current, 1000V AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode, Continuity and Temperature. DO NOT MEASURE DC CURRENT!
  • Inrush Current Meter: Knowing the value of inrush current can help you locate a startup problem quickly, whether it’s in the motor or in the starting circuit. The measuring time of inrush current is about 100ms.
  • NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage. Convenient LED flashlight illuminates a dimly lit area.
  • Advanced Functions: The Clamp Meter has VFD, LOZ, MAX, MIN, REL, RAN, Date Hold, Low battery display and automatic shutdown. Multi-function clamp meter can satisfy all your needs
  • Safety Service: Safety standard IEC 61010-1, CAT IV 600V, CAT III 1000V. Double insulation. Use high-quality material, prevent electric shock harm. 36-Month product service provided. 7/24 Customer Service.

9. Ingco Auto Ranging Digital Clamp Meter TRMS 6000 Counts Measures AC/DC Voltage AC/DC Current Resistance Capacitance Diode Test Temperature DCM6005

  • WIDE RANGE OF TESTS. INGCO TRMS auto ranging clamp meter meets all your needs for measuring, including AC/DC voltage, AC/DC current, resistance, capacitance, diode test, frequency, duty-cycle, temperature, etc.,
  • EASY TO USE. The backlight changes to orange when volt > 80V or current > 3A with dual readings; Flashing lights help place the probes to correct position; Hold function locks data for easy reading; The orange backlight is on, and the buzzer sounds when resistance value < 30Ω; It switches off automatically without operation in 15mins
  • PROFESSIONAL MULTIMETER. Automatic range turntable design and NCV non-contact measurement. The low pass filter (LPF) ensures accurate drive output measurements; LowZ (low input impedance voltage measurement) can safely troubleshoot sensitive electronic or control circuits and circuits that may contain false voltages, and can more reliably determine whether there is a voltage on the circuit
  • ALL ON ONE DEVICE. 100mF large capacity. INGCO clamp meter can be used as clamp meter as well as capacitance meter. 100mF equals 100000μF. It’s perfect for testing professional electrial issues, like automotive, industrial and household issues
  • WORRY-FREE ORDER. If you are not 100% satisfied with our clamp meter, we offer you 90 days refund or replacement. If you have any problem,please contact with us by email, we will solve it for you within 24 hours

10. AstroAI Digital Clamp Meter Multimeter 2000 Counts Amp Voltage Tester Auto-ranging with AC/DC Voltage, AC Current, Resistance, Capacitance, Continuity, Live Wire Test, Non-contact Voltage Detection

  • Versatile Digital Clamp Meter: Accurately measures AC Current (DO NOT MEASURE DC CURRENT)! AC/DC Voltage, Capacitance, Resistance, Diode Continuity and Live Wire Tests. This clamp meter is a really useful tool for solving industrial and household electrical issues
  • Large Jaw Opening: The jaw opening measures AC current in a conductor without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces
  • Thoughtful Design: Support Data Hold, Max/Min, Auto Shut-off, low battery indicator and continuity buzzer. Includes Convenient features like Audial and Visual Alarm, LCD Backlit Screen and Flashlight make it easy to use. Two 1.5V AAA batteries are included in the package
  • Non-contact Voltage Testing: This Clamp Meter features non-contact voltage testing with sound and light alarm. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a quick beep
  • Additional Tips: The clamp meter has passed the environmental pollution degree 2 and overvoltage category III 600V safety standards. Combined with Amazon’s excellent delivery, we provide lifetime technical support.

Leave a Comment