Top 10 Best left hand drill bits 2022

1. AKM Screw Extractor with Drill Bit Set,bolt extractors,Multi-spline Extractors,and Left Hand Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings| SAE

  • 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors.
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel.
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64″,7/64″,1/8″,5/32″,3/16″,7/32″,1/4″,9/32″,19/64″,5/16″,11/32″,3/8″,13/32″,7/16″,15/32″,1/2″.
  • CRMO Material Damaged Screw Extractor:Our AKM screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 13/32″, 7/16, 15/32, 1/2″
  • Wildly range of adaptations:Can be used with Power drills, flat or allen wrenches,tap adapters.

2. Drill Hog 13 Pc NIOBIUM Left Hand Drill Bit Set Index Drill Bits USA

  • 1/16 to 1/4 by 1/64ths (Does not skip any sizes)
  • Niobium Nb41 Steel
  • Left Hand Thread (Flutes are Counterclockwise)
  • Used for Removing Broken Bolt, Screws, and Studs
  • Made by Drill Hog USA

3. NEIKO 10037A Left Hand Drill Bit Set | 15 Piece | SAE (1/16″ – 1/2″) | Reverse Twist | M2 HSS with Titanium Nitride Coating

  • [QUALITY]: This drill bit set is constructed of high speed steel with a titanium nitride coating, which give it very high surface hardness to help penetrate tough materials while highly corrosion resistant reducing friction between bit and workpiece.
  • [DESIGN]: These drill bits come with a twist design to increase cutting speed with an angled tip that is a 135 degree split point for precise self-centering and designed to cut holes faster as it prevents walking, clears chips and particles faster.
  • [LEFT-HAND BITS]: Special left hand design can also be used with reversible drills with screw extractors to remove broken fasteners and to remove screws, bolts, and studs for home repairs, at your automotive garage, and more.
  • [CONVENIENCE]: Each bit has an assigned hole in a drill bit holder with size index markings for quick organization and easy storage for use for home improvement or on the go in a snap.
  • [INCLUDES]: 15 Sizes – 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32 and 1/2 inch bits that comes in a metal index case for easy storage.

4. wesleydrill Left Hand Drill Bit Set 13pcs 1/16″-1/4″ Titanium Twist Reverse Drill Bits Fit for Cutting Metal, Cast Iron, Hard Plastics and Wood, and are Also Available for Softer Materials

  • [Specifications and packaging]: 13 Piece HSS left fult drill bit set.Include size: 13pcs left hand drill bits 1/16″,5/64″,3/32″,7/64″,1/8″,9/64″,5/32″,11/64″,3/16″,13/64″,7/32″,15/64 “,1/4 ” all in metal case.
  • [Function]: Metal drill bits are particularly suitable for cutting metal, cast iron, hard plastics and wood, and are also available for softer materials.
  • [Material]: Twist drill bits classic HSS construction with titanium coating for capability and durability.
  • [Advantage]: Titanium drill bit’s cutting edge is hardened and honed for sharpness.The split point tip increases cutting speed while easy self centering prevents walking. Say bye to all those chips and particles,the drill bit can quickly clears them out, and leaves a clean, smooth hole.
  • [Special Left flut Design]: Left hand drill bit set’s special left hand design can also be used with screw extractors to remove broken fasteners.Attachable to reversible drills to remove screws, bolts, and studs around the house, garage or on the job site.

5. COMOWARE Screw Extractor & Left Hand Drill Bit Set- Broken Bolt Remover HSS M2, 10pcs with Metal Index Case

  • EASY OUT REMOVING: It is more convenient and easy to remove the broken screw from the damaged workpiece by using the left hand drill bit which coordinates with the screw extractor. Spiral groove on screw extractor can go deep into screw to increase grip force to remove studs, screws and bolts around the house, garage or on your job project.
  • HIGH QUALITY CARBIDE MATERIAL: The left hand drill is made of HSS M2. Compared with ordinary high speed steel, M2 material can prolong the service life, enhance wear resistance and remove chippings clearly. HSS are harder and tougher than other materials.
  • UNIQUE DESIGN: The 118°angle makes it easier to cut into the workpiece with small axial resistance. This design can not only increase the length of cutting edge work but also decrease the nominal thickness of cutting layer, which improves heat dissipation and durability with better cutting effect.
  • CONVENIENT ORGANIZATION AND STORAGE: Come with a metal index case, convenient to use and carry.
  • SET INCLUDING: 5pcs alloy steel screw extractors and 5pcs HSS M2 left hand drill bits. Screw extractor includes #1, #2, #3, #4, #5. Left hand drill bit model includes 5/64″, 7/64″, 5/32″, 1/4″, 19/64″.

6. COMOWARE Left Hand Drill Bit Set, 13 Piece | M2 HSS with Titanium Nitride Coating | SAE (1/16″ – 1/4″)

  • 135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster
  • Bits made of high speed M2 steel with a titanium nitride coat for added durability
  • Special left hand design can also be used with screw extractors to remove broken fasteners
  • Attachable to reversible drills to remove screws, bolts, and studs around the house, garage or on the job site
  • Set includes: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64 and 1/4 inch bits; Comes in metal index case for easy storage

7. NEIKO 01925A Screw Extractor and Left Hand Drill Bit Set, 10 Piece, Cobalt HSS Drill Bits, Alloy Extractors, clear color

  • [APPLICATION]: Extraction bits easily remove broken screws, studs, bolts and other fittings effectively
  • [DURABLE]: Left-handed drill bits are made from cobalt fortified high speed steel for increased durability and service life
  • [DESIGN]: Spiral flutes on screw extractors dig into the screw, increasing grip as torque is applied
  • [CONVENIENCE]: Stored in a durable metal index carrying case for organization and storage with all sizes that are clearly labeled
  • [INCLUDES]: Sizes: Bits – 5/64″, 7/64″, 5/32″, 1/4″, 19/64″ and Matching Alloy Extractors – #1, #2, #3, #4, #5

8. IRWIN Left Hand Drill Bit Set, Cobalt, 5/64-Inch to 19/64-Inch, 5-Piece (30520)

  • Drill bits made of M-42 8% cobalt high-speed steel for super abrasive resistance in tough metals
  • 135° split point reduces feed pressure for easier penetration without work hardening
  • Each drill bit has a heavy-duty spiral flute design that produces fast chip ejection
  • Shorter cutting lips reduce torque for drilling in high-tensile-strength materials
  • IRWIN drill bits are great for use with screw extractors
  • Includes: 5/64-Inch, 7/64-Inch, 5/32-Inch and 19/64-Inch
  • 135 Degree split point
  • M-42 Cobalt steel for tough metals
  • 5 PC Set
  • Weight 1 lbs

9. Drill Hog Left Handed Drill Bit Set Screw Extractor EZ-OUT

  • 1/16″ to 1/2″ (15 Pc Set)
  • HI-Molybdenum M7 Steel
  • Left Hand Thread for Removing Broken Bolts, Screws, and Studs
  • 135 Degree Split Point Prevents “Walking”
  • Made by Drill Hog USA

10. Topec 35-Piece Screw Extractor and Drill Bit Set, bolt extractors, Multi-spline Extractors, and Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings

  • 35-PIECE MULTIFUNCTIONAL SET- 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits, 6pcs spiral screw extractors,
  • VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 35 models of parts including imperial sizes such as: 1/8″, 5/16″, 5/8″, 7/16″, 11/32″, 1/4″ etc. You can choose the suitable size according to the size of your fasteners to meet various job requirements.
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel.
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill these fasteners
  • PREMIUM SERVICE – If you have any problems during using our product. Contact our Professional after-service team via email. Topec Direct after-sale Team will get in touch with you and timely solve your problems

Leave a Comment