ASSEMBLED FINISHED: ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine No soldering/assembly work needs It can be used directly to avoid assembling /welding process problems and greatly save your time
UPGRADED VERSION: The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV/div – 20V/div while the others is only 10mV/div – 5v/div
HAND-HELD: This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop
ROTARY ENCODER: It has been added the rotary encoder makes parameter adjustment more quicker and easier
WHAT YOU GET: You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also provided
2. AUKUYEE Updated 2.4″ TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)
UPGRADED VERSION – The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div – 20V/div. Also, this updated version can be handheld.
DESIGNING TO YOUR NEEDS – Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated.
ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment quicker and easier.
ASSEMBLED FINISHED – AUKUYEE Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time.
WHAT YOU GET – You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided.
???????? ???????????????????????? : 7” color TFT- LCD touch screen with 800 * 480 resolution.
???????????????????????? ???????????????????????????????????? :Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.
???????????????????????????????????????????? ????????????????-???????????????? : Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V.
???????????????????????????????????? : ASD1013D is widely applicable in the academic experiment, electronic product design,debugging and maintenance, electronic engineering education, etc.
4. YEAPOOK ADS1014D 2 in 1 Digital Oscilloscope DDS Signal Generator with 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate (ADS1014D)
???????????????????????????????? ???????????????????????? ???????????????????????????????????? : Built in DDS Function Signal Generator,14 standard signals (@ 2.5vpp), including sine wave, square wave, triangle wave, ect. [Only the Frequency is adjustable]
???????????????????????????????? ???????????????????????????? ???????????????????????? : It intercept whole or part of the complex signals from the oscilloscope as the output signal of the signal generator. It can store up to 1000 customized signals.
???????????????????????? ???????????????????????????????????? : Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.
???????????????????????????????????? ???????????????????????????? ???????????????????????????? & ???????????? ???????????????????????????? : Lissajous figure can be used to compare and judge the amplitude, frequency and phase of two groups of signals. the FFT function can estimate the harmonic component of signals
5. Oscilloscope Multimeter, LM2020 New Update, Professional LED Handheld Oscilloscope Multimeter with 2.5 Msps high Sampling, Automatic Waveform Capture Function,DC/AC Voltage/Current Test
▼FASTER SAMPLING SPEED – 2.5Msps high-speed A/D data collecting, high sampling rate and high bandwidth, one-key transform to waveform function furing measuring.3 waveform scanning modes: automatic/conventional/single. Improve work efficiency.
▼MORE POWERFUL DETECTION RANGE -DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 10A, Resistance 0 ~ 40MΩ, Capacitance 0 ~ 100μf, Frequency 0 ~ 5MHZ, Diode / Continuity open circuit voltage 1.5V, judgement resistance 50Ω. Transistor amplification test to meet all test requirements.
▼MORE ACCURACY -Dedicated Chip, the automatic waveform capture function, easy operation. The software calibration technology, memory calibration coefficients. Measure more accurately.
▼LED BACKLIGHT & STORAGE / READOUT – Analog broadband range up to: D AC ~ 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values. 240X320 color screen with LED backlighting. More clear and suitable for working at night.
▼OVERLOAD PROTECTION & MULTI-PURPOSE – Built-in 500mA/10A double protective tube, dual protection of the instrument. Can choose to automatically shutdown or continuous operation, applicable to the workplace such as family, school, and factory. DISTORTION DETECTION ALSO Protect safety.
Function: Oscilloscope+Multimeter+Waveform Generator; 70 MHz Digital Oscilloscope with 2 channels — Sample Rate Range 250MSa/s(Single-channel), 125MSa/s(Dual-channel).
Simplify operation, convenient to use: 250M Sampling rate, 70MHZ Bandwidth. 10MV-10V Vertical resolution; Auto automatic measuring function; Key tone settings, Adjustable backlight brightness, Backlight, duration and auto power off time. Digital voltmeter function, Cursor measurement, reference waveform,waveform Storage function.
Multifunction Digital Multimeter Function, High sensitivity and accuracy, showing clear, stronganti-overload capability, easy to carry. Digital multimeter which can be used to measure AC/DC voltage/current, resistance, diode,capacitance, on-off test.
Large-capacity Lithium Battery + Ultra Low Power + Type C Data Transfer/Charging Interface 18650 replaceable lithium battery power system; Be able to recharged by 5V/2A large current or ordinary computer USB port,allow while charging, very convenient and handy; Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months.
We offer 1 year warranty with 30 days worry-free return, so 100% satisfaction and zero hassle returns guaranteed. Please don’t hesitate to contact us when you use the item.
7. AUKUYEE Updated 2.4″ TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)
UPGRADED VERSION – The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div – 20V/div. Also, this updated version can be handheld.
DESIGNING TO YOUR NEEDS – Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated.
ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment quicker and easier.
ASSEMBLED FINISHED – AUKUYEE Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time.
WHAT YOU GET – You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided.
8. EspoTek Labrador: Easy-to-Use, Open-Source, All-in-One USB Oscilloscope, Signal Generator, Power Supply, Logic Analyzer, Multimeter for Windows, Mac, Linux, Android, Raspberry Pi
