Top 10 Best plug cutter 2022

1. Make it Snappy Tools 3 Piece Tapered Plug Cutter Set

  • Set of 3 includes; 1 each – 1/4″, 3/8″, and 1/2″ plug cutters
  • Sharp clean cutting too is hardened for long life.
  • Use with your Snappy quick change chuck in your drill press.
  • Match wood grain to conceal screws.
  • Made in USA by Snappy.

2. Rocaris 8pcs Wood Plug Cutter Drill Bit Set Straight and Tapered Taper Cutting Tool Cork Drill Bit Knife 6mm 10mm 13mm 16mm

  • This set includes 4 standard plug cutters and 4 four-tooth chamfered cutters.
  • Chamfered Cutters Make Tapered plugs To Fill Countersunk Holes.
  • Use Standard Cutters To Eliminate Imperfections In Wood.
  • 8 Piece Plug Cutter set Makes perfect plugs for counter-bored holes.
  • The Cutter set Achieves excellent finish when using same timber.

3. Snappy Tools Plug Cutter, 3/4″

  • 3/4″ hex drive plug cutter
  • Hardened steel for long life
  • Tight fit; no glue needed
  • Plug cutters fit in quick change chuck in a drill press
  • Tapered sides and a chamfered end for easy start

4. Grizzly Industrial H7693 – Deep Plug Cutter 6 pc. Set

  • Cut plugs and long tenons up to 2-1/8-Inch with this 6-pc
  • Deep Plug Cutter Set. Diameter sizes include 3/8-Inch, 1/20-Inch, 5/8-Inch, 3/4-Inch 7/8-Inch and 1-Inch
  • Each cutter is protected in a fitted wooden case. Shank size is 1/2-Inch
  • Cut plugs and long tenons up to 2-1/8″ with this 6-pc
  • Deep Plug Cutter Set. Diameter sizes include 3/8″, 1/2″, 5/8″, 3/4″ 7/8″ and 1″
  • Each cutter is protected in a fitted wooden case. Shank size is 1/2″

5. CMT 529.095.31 Plug Cutter, 3/8-Inch Minor Diameter, 49/64-Inch Diameter, 1/2-Inch Shank

  • 4 Cutting Edges, 5-1/2-Inch Overall Length.
  • Max suggested RPM: 500 on hardwood, 1000 on softwood.
  • Made of alloyed steel, long-lasting cutting performance.
  • For making plugs in soft and hardwood.

6. 23 Pack Woodworking Chamfer Drilling Tool, 6pcs Countersink Drill Bit, 7pcs Three Pointed Countersink Drill Bit, 8pcs Wood Plug Cutter, with L-Wrench and Automatic Center Punch

  • 【Professional Woodworking Set】- Woodworking chamfering drill set includes 6pcs 1/4″ hexagonal shank HSS 5-edge 90 degree countersunk bit, 7pcs triangular high-speed steel countersunk bit with L-shaped wrench; 8pcs cork milling bit and 1 automatic center punch
  • 【Three Pointed Countersunk Drill Bit】- It’s made of high-speed steel, with good wear resistance and durability, including 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm pilot holes, large chip flutes and five chamfers for speed up cutting speed and easier to discharge wood chips
  • 【Wood Plug Cutter】- 3/8″ shank wood plug cutter bit set is made of durable carbon steel, used for tapered 1/4″, 3/8″, 1/2″, 5/8″ wood plugs to cover recessed screw holes or hide blemishes, able to cut plugs to 22mm/23mm/25mm/26mm in length
  • 【Countersink Drill Bit】- It is made of high-speed steel with good wear resistance and durability. There are 6 different diameter sizes 1/4″ (6mm), 5/16″ (8mm), 3/8″ (9mm) )), 1/2″(12mm), 5/8″(16mm), 3/4″(19mm), used for sinking 90 degree countersunk screws and fixing parts on 6 different sizes of wood and PVC boards hole
  • 【Multiple Application】- This is a complete set of woodworking tools, which can be used for wood, particle board, fiberboard, logs, plastic boards, PVC pipes, etc. It is very suitable for professionals or beginners, and will be a good gift for your friends, fathers, carpenter lovers and DIY lovers

7. Yakamoz 8 Pieces HSS Taper Claw Type Wood Plug Cutter Drill Bits 5/8″ 1/2″ 3/8″ 1/4″

  • Diameter sizes include 1/4″, 3/8″, 1/2″, 5/8″ (6.3mm/ 9.5mm/ 12.7mm/ 15.8mm), Shank Diameter: 9.3mm
  • Chamfered cutters make tapered plugs to fill countersunk holes.
  • 8 Piece Plug Cutter set Makes perfect plugs for counter-bored holes.
  • Material: Carbon Steel, titanium-coated for extended working life.
  • Package included: 4 standard plug cutters and 4 four-tooth chamfered cutters

8. JNB Pro Wood Countersink Drill Bit Set & Wood Plug Cutters – 2 Pc Adjustable Countersink Bit #8(7/64″) #12(7/32″) and 2 Wood Plug Cutters or Dowel Cutters 3/8″ & 1/2″ Diameter- 1 Hex Wrench – 1/4″ Quick Change Shank

  • COUNTERSINK DRILL BIT SET & WOOD PLUG CUTTERS – Included 2 Pieces #8(11/64″) and #12(7/32″) Adjustable Countersink and Counterbore Cutters with HSS M2 Tapered Drill Bit (for up to 3/8″ and 1/2″ screws head), 2 Wood Plug or Dowel Cutters 3/8″ and 1/2″ diameter, 1 Hex Wrench. The set is Imperial Units of Measurements (not metric) – Also known as Adjustable Countersink, Countersink Bits For Wood, Dowel Maker, Plug Cutter For Woodworking, Plug Cutter Kit
  • IMPORTANT TIPS FOR USE – Cutters for Countersink and Counterbore depth are Adjustable for many screws sizes. Developed to complement each other the Adjustable Countersink & Counterbore makes perfect and clean holes to be filled with the Wood Plugs or Wood Dowels. Plug Cutters must be used with Drill Press to have a perfect diameter. The Plug Cutters are not designed to be used with a hand drill, attempting to use a hand drill will cause broken blades or imperfect plugs.
  • QUICK CHANGE SHANK – The Quick Change 1/4″ Shank is Universal size, Compatible with all 1/4″ Quick Change Chucks.
  • QUALITY VALUE SET – Our Countersink Drills and Plug Cutters are manufactured in China under JNB Pro Requirements. High Speed Steel M2 (6542 grade) Drill Bit and Carbon Steel #45 Sink and Plug Cutters coated with Black Oxide anti-corrosion make our product have better or same quality as USA made. If for any reason your are not satisfied with the product you are invited to return or have product replaced. Your satisfaction is our goal.

9. Snappy Tools Plug Cutter, 3/8″

  • 3/8″ hex drive plug cutter
  • Hardened steel for long life
  • Tight fit; no glue needed
  • Plug cutter fits in quick change chuck in a drill press
  • Tapered sides and a chamfered end for easy start

10. CAIDU 8pcs Wood Plug Cutter Cutting Tool Drill Bit Set Straight and Tapered Taper 5/8″ 1/2″ 3/8″ 1/4″ Woodworking Cork Drill Bit Knife

  • CAUDU 4 standard plug cutters and 4 four-tooth chamfered cutters
  • ✭Deep Plug Cutter Set. Diameter sizes include 1/4″;3/8″;1/2″;5/8″ (6mm/10mm/13mm/16mm)
  • ✭Chamfered cutters make tapered plugs to fill countersunk holes.Wood Plug Cutter Cutting Set Dowel Maker Cutting Tools.
  • ✭Uses: for bench drill and hand drill, recommended bench drill, easy to center. Note: the speed should not be too fast, or easy to produce smoke, burnt black and so on.
  • High quality metal, use pay attention to rest, avoid burning knife, Oil can prolong life

Leave a Comment