Top 10 Best receptacle tester 2022

1. Sperry Instruments STK001 Non-Contact Voltage Tester (VD6504) & GFCI Outlet / Receptacle Tester (GFI6302) Kit, Electrical AC Voltage Detector, Yellow & Black

  • VERIFIES VOLTAGE PRESENSE: Verifies the presence of AC Voltage prior to working on electrical installation or troubleshooting (GFI6302 and VD6504)
  • DURABLE: Hi-Impact Resistant ABS housing with soft over-molded rubber grips with a compact ergonomic design (GFI6302 and VD6504)
  • QUICKLY READ: Bright color-coded neon lights for easy visual indication (GFI6302)
  • CIRCUIT SENSING: Non-Contact sensitivity detects 50-1000V AC and patented battery self-test feature (VD6504)
  • AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection (VD6504)
  • RATED: CAT Rating III 300V, C-UL US (GFI6302), CAT Rating III 1000V, IV 600V, (VD6504) 10 ft Drop and 250 lb Crush (GFI6302 and VD6504)

2. Klein Tools RT250KIT Non-Contact Voltage Tester and GFCI Receptacle Tester with LCD and Flashlight, Voltage Electrical Test Kit

  • GFCI Receptacle Tester features a large backlit LCD readout of voltage, and clear indication of wiring conditions
  • LCD readout shows the time required to trip a GFCI device
  • Patent pending detection of Open Neutral / Open Ground wiring fault
  • For use on 3-wire, North American 120V electrical outlets only
  • Non contact voltage tester’s dual-range detects from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
  • Detects voltage with simultaneous visual and audible voltage indicators
  • Bright flashlight illuminates work area and may be used independent of voltage detection function

3. Klein Tools RT250 GFCI Receptacle Tester with LCD Display, for Standard 3-Wire 120V Electrical Outlets

  • LARGE CLEAR LCD READOUT on receptacle tester to instantly view results without the need to look at a chart to understand results
  • TEST GFCI TRIP TIME IN SECONDS to find out if the trip breaker is functioning
  • DETECT WIRING FAULTS of open ground, open neutral, open hot, dual open (neutral and ground), reversed hot/ground, and reversed hot/neutral
  • AUTO-HOLD FUNCTION is convenient for hard-to-reach outlets
  • SAFE AND DURABLE TESTER for inspections on North American 120V outlets
  • BRIGHT LED LIGHTS illuminate green and red for visual indicators
  • TRUSTED SAFE with a safety rating of CAT II 135V

4. Southwire Tools & Equipment 40012S Receptacle Tester, Black

  • FAST & ACCURATE: Southwire’s 120 Volt AC receptacle tester is the ideal tester for home inspectors, electricians and home renovators who need to check the wiring of outlets in homes and offices
  • 2-SIDED LEGEND: Only from Southwire! Easily read test results with the tester facing right-side up or even upside down (depending on the outlet’s ground location) with brightly colored indicator lights and the 2-sided fault legend
  • 6 TESTS IN ONE: Open ground, open neutral, open hot, hot and grounded reversed, hot and grounded neutral reversed and correctly wired
  • SMALL YET DURABLE: Its small size won’t take up much space and fits perfectly in your tool bag and the durable housing with reinforced pins will withstand up to a 6-foot drop
  • 5-YEAR
  • UL Listed
  • Material Type: Abs

5. Sperry Instruments GFI6302 GFCI Outlet / Receptacle Tester, Standard 120V AC Outlets, 7 Visual Indication / Wiring Legend, Home & Professional Use, Yellow & Black

  • DURABLE: Hi-Impact Resistant ABS housing with soft over-molded rubber grips with a compact ergonomic design (GFI6302 and VD6504)
  • QUICKLY READ: Bright color-coded neon lights for easy visual indication (GFI6302)
  • TESTING CAPABILITY: Standard 3-Wire and GFCI protected 120Volt AC Outlets. Frequency (Hertz) 60Hz (GFI6302)
  • GFCI FUNCTION: Tests GFI Outlets and standard outlets that are wired in series with GFCI outlets (multiple outlets in kitchen or bath)
  • RATED: 10 ft Drop and 250 lb Crush, CAT Rating III 300V, C-UL US, CE-Marking and recognized by Occupational Safety Hazards Association (OSHA) as an National Recognized Testing Laboratory (NRTL). 10 ft Drop and 250 lb Crush
  • WARRANTY: Sperry Instruments Backed Limited Lifetime Warranty

6. Gardner Bender GFI-3501 Ground Fault Receptacle Tester & Circuit Analyzer, 110-125V AC, for GFCI / Standard / Extension Cords & More, 7 Visual LED Tests , Red

  • Tests: standard outlets, GFCI outlets, extension cords
  • Compact and easy to use
  • Tester trips between 6-9 mA
  • Succession of yellow and red lights provide indication of circuit status or specifies wiring errors
  • Tests for ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring

7. Klein Tools RT210 Outlet Tester, Receptacle Tester for GFCI / Standard North American AC Electrical Outlets, Detects Common Wiring Problems

  • GFCI Tester detects the most common wiring problems in standard and GFCI receptacles
  • Works on GFCI outlets and confirms operation of the ground fault protective device
  • Built to withstand a 6.6-foot (2m) drop
  • Operating temp: 32-Degree to 140-Degree Fahrenheit (0-Degree to 40-Degree Celsius)
  • Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet

8. Klein Tools RT110 Receptacle Tester for North American AC Electrical Outlet Receptacles

  • Outlet tester’s light sequence on receptacle tester indicates correct/incorrect wiring
  • Receptacle tester conforms to UL Std 1436, Certified to CSA Std C22.2 #160
  • Operating temp: 32-degrees F to 140-degrees F (0-degrees C to 40-degrees C)
  • Built to withstand a 6.6-foot (2m) drop
  • Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet
  • Designed to detect the most common wiring problems in standard receptacles
  • Designed to detect the most common wiring problems in standard receptacles

9. Klein Tools NCVT2PKIT Non-Contact Voltage Tester with Receptacle Tester, 12-48V AC or 48 – 1000V AC Dual Range for Broad Application

  • Kit contains a non-contact voltage tester and receptacle tester
  • Dual range NCVT-2P automatically detects and indicates low voltage range and standard voltage (48-1000V AC)
  • NCVT-2P provides non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
  • NCVT-2P is a lightweight, compact tool with pocket clip for convenient storage and quick access
  • CAT IV 1000 Volt rating provides expanded operation and protection
  • Screw-thread battery cap with O-ring ensures protection against dust and water ingress for the NCVT-2P
  • Receptacle Tester is designed to detect the most common wiring problems in standard receptacles

10. Klein Tools RT310 Receptacle Tester, AFCI and GFCI Outlet and Device Tester for North American AC Electrical Outlet Receptacles

  • GFCI Tester detects the most common wiring faults in standard, AFCI, and GFCI electrical outlets
  • Test AFCI devices by simulating arc fault conditions
  • Test GFCI devices by simulating ground fault conditions
  • Capable of detecting a dual-open wiring fault with simultaneous open neutral and open ground wires (patent pending technology)
  • Tester delivers clear visual indication of the wiring condition at the electrical outlet
  • Designed to test North American-style grounded electrical outlets in 120V AC circuits (incorporates a three-pin plug)
  • Electrical plug is on a 10-Inch (25.4 cm) flexible electrical cord to access electrical outlets in difficult to reach locations

Leave a Comment