Top 10 Best rip saw 2022

1. Kataha Tatebiki Z Saw 10″ Single Edge Rip Saw

2. Lynx Garlick Thomas Flinn British 20” Rip Saw with Taper Ground Blade, Stained Beech Handle 4.5 TPI and Filed for Rip Cutting

  • This saw is made by Thomas Flinn of Sheffield England the last traditional saw and plane maker in the UK.
  • Saw plate is made from Sheffield allow spring steel and taper ground providing a good balance of edge durability and ease of sharpening.
  • The saw plate is taper-ground and gets progressively thinner (approx. 0.005 inches) from the teeth to the back of the saw. This greatly reduced binding in the cuts.
  • Handle is stained European Beech with brass button screws
  • 20” saw plate has 4.5 TPI and filed for rip cutting

3. Kreg KMA2685 Rip-Cut Circular Saw Guide , Blue

  • Make rip cuts and crosscuts up to 24″ Wide
  • Cut multiple pieces to the same size With just one setup
  • Use the oversize edge guide for precise control throughout the cut
  • Eliminate need for marking, measuring, and layout lines
  • Take your saw to the material instead of having to take your material to the saw

4. Rip Saw: A Detective Jericho Novel (The Detective Jericho Series Book 8)

5. DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

  • Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual
  • Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM
  • Rolling stand designed for easy set up and breakdown with excellent stability
  • Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
  • Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

6. Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws • Also Works with Router Tables and Band Saws

  • Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.
  • The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
  • The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.

7. Luxite Saw 12 inch 40-Tooth Carbide Tip Rip Saw Blades for Table Saws

  • The 12-inch Luxite Saw Series 35 saw blade has a low count of 40 teeth, which provides smooth, high-performance cuts along the grain.
  • The blade makes aggressive yet clean cuts in soft, hard and exotic woods, as well as particle board and other non-laminated composites using additional gullet depth, an extreme 20-degree hook angle and a staggered tooth layout.
  • The carbide material on the blade’s tips is designed to reduce kerf tearout and chipping, create clean cuts and outlast traditional rip saw blades.
  • Luxite Saw 40-tooth rip saw blades are compatible with nearly all major brands of table saws and miter saws that take a 12-inch blade diameter and a 1” arbor.
  • All 12-inch models of Luxite Saw rip saw blades are created and tested for quality assurance entirely in the United States. For more information and installation guides, visit the York Saw & Knife blog.

8. Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge & 7 Accessories

  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
  • [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut

9. Spear & Jackson 9500R Back Saw, Brown and Silver 22 Inch x 10 ppi

  • Universal teeth for general use, cuts along and across the grain
  • Precision cross ground teeth
  • Teeth can be resharpened
  • Skew back for balance & reduced friction
  • Cuts timber chipboard, plywood & other wood based materials

10. Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch Precision Edge Guide

  • CUTS: Make rip cuts and crosscuts up to 24″ wide / Cut multiple pieces to the same size with just one setup / Prevent splintering with anti-chip strips that support material during the cut
  • GUIDE: Use the oversize edge guide for precise control throughout the cut / Eliminate need for marking, measuring, and layout lines / Hold track in place without clamps thanks to anti-slip guide strips
  • EASY SAWING: Take your saw to the material instead of having to take your material to the saw
  • VERSATILE: Rip, cross cut, and make angled cuts up to 48″ long in plywood, MDF, and panels / Simply align the Guide Track with your marks to make accurate cuts
  • BUNDLE INCLUDES: Kreg KMA2700 Accu-Cut 48-Inch Circular Saw Guide Track System

Leave a Comment