Top 10 Best subwoofer under $1000 2022

1. Echo Sub – Powerful subwoofer for your Echo – requires compatible Echo device

  • Echo Sub delivers down-firing, 100W deep bass sound through a 6″ woofer.
  • Pair with one Echo device to enjoy dynamic music that fills the room.
  • Pair with two of the same Echo devices for rich left/right stereo sound.
  • Simple to set up and use—just plug in, open the Alexa app, and wirelessly connect to your Echo device(s) to control music with your voice.

2. Yamaha 8″ 100W Powered Subwoofer – Black (NS-SW050BL)

  • New twisted flare port contributes to clear and tight bass
  • Advanced YST II (Yamaha Active Servo Technology II)
  • 8” cone woofer
  • Stylish addition to any room
  • Dynamic Power: 100W (5 ohms)

3. Monoprice 60-Watt Powered Subwoofer – 8 Inch With Auto-On Function, For Studio And Home Theater Black

  • This is an 8″ powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
  • High-level inputs accept a full-range signal from the amplifier’s stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA “Y” cable to split the output and send it to the two line level inputs on the subwoofer.
  • The subwoofer is housed in an attractive black wood cabinet that measures 13.75″ x 11.75″ x 11.75″ (H x W x D). The driver and a 2 3/4″ sound port are located on the front, covered by a black cloth speaker grill.

4. Skar Audio EVL-12 D2 12″ 2500 Watt Max Power Dual 2 Ohm Car Subwoofer

  • Peak Power: 2,500 Watts | RMS Power: 1,250 Watts
  • 3″ High Temperature Dual 2-ohm Voice Coil with Black Coating
  • Competition Grade Paper Cone & High Roll Foam Surround
  • Premium Suspension Featuring the EVL Series Signature Red Two Layer Spider
  • Deep, Low, Extremely Responsive Bass | Sensitivity: 85.1 dB
  • Frequency Response Range: 25 Hz – 250 Hz | Xmax: 23.5 mm (one-way)

5. Klipsch Synergy Black Label Sub-100 10” Front-Firing Subwoofer with 150 Watts of continuous power, 300 watts of Dynamic Power, and All-Digital Amplifier for Powerful Home Theater Bass in Black

  • Spun copper front-firing Cerametallic woofers
  • 10-inch, front-firing driver
  • 150 watts continuous, 300 watts dynamic power
  • Strong, flexible, removable grille
  • All digital amplifier for high-efficiency and true-to-source sound accuracy
  • Must be connected to AV Receiver, processor, or pre-amp
  • Contemporary finish to integrate with any decor with ease
  • Dimensions: 14” H x 12.5” W x 15.7” D
  • What’s in the box: (1) Sub-100 Subwoofer and power cord – connection wires not included
  • Place your subwoofer in a corner for optimal performance

6. BOSS Audio 12″ 3200W 4-Ohm SVC Car Stereo Subwoofer Set, Pair | P12SVC

  • Boss P12SVC 12″ 1600W Car Subwoofer (Pair)
  • 1600W Max (3200 Watt per Pair)
  • 800W RMS (1600 Watt per Pair)
  • Bytul rubber
  • Polypropylene Cone

7. Polk Audio PSW10 10″ Powered Subwoofer – Power Port Technology, Up to 100 Watts, Big Bass in Compact Design, Easy Setup with Home Theater Systems Black

  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
  • DOUBLE THE AMPLIFIER POWER TO 100 Watts of Dynamic Power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and FIT FOR EXTENDED USE
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly! Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete!

8. Rockville Rws12ca Slim 1200 Watt 12″ Amplified Powered Car Subwoofer Enclosure

  • Rockville Rws12ca slim 1200 Watt 12″ Amplified powered car Subwoofer Enclosure.
  • 1200 watts peak power output. 300 watts RMS. 12″ Super slim subwoofer.
  • Ultra stiff composite pulp cone with Kevlar reinforcement. 3D molded acrylic dust cap. Expanded & Rolled Steal basket.
  • High density laminated foam Surround. High power strontium magnet with ultra Saturated high BL motor structure.
  • Vented core magnet motor structure. 2″ High temperature aluminum voice coil. 8mm washer & yoke plates. 13.6mm Peak-to-Peak x-max. 70oz.
  • Magnet motor structure. Super slim sealed MDF enclosure design. Aviation grade black tweet Carpet with embroidered logo.
  • Black texture synthetic Leather front panel. Impedance: 4-ohms. Frequency Response: 38hz-500hz. Spl @ 1W/1M: 96Db.
  • Dimensions: 24″ Length x 15″ Height 4.37″ Top depth x 6.65″ Bottom depth. Built-in 300 watts RMS/ 1200 Watt mono block amplifier.
  • 150Mv – 5V variable input level. 24Db low Pass Crossover frequency 50hz-250hz. Low level RCA inputs.
  • High level speaker level input with auto start music sense. RJ11 jack for dash mounted bass remote.

9. Polk Audio Signa S2 Ultra-Slim TV Sound Bar | Works with 4K & HD TVs | Wireless Subwoofer | Includes HDMI & Optical Cables | Bluetooth Enabled, Black

  • A PREMIUM ULTRA-SLIM SOUND BAR WITH INCLUDED WIRELESS SUBWOOFER – 5 powerful full-range drivers deliver BEAUTFUL RICH SOUND WITH DEEP BASS. POLK’S EXCLUSIVE VOICE ADJUST TECHNOLOGY & Dolby Digital Decoding maximizes sound clarity & reduces voice delays
  • EXCELLENT SOUND AND VALUE on par with any mid- to high-range sound bars available in the market. At just over 2″ tall, it fits most spaces — easily wall-mount it or place in front of your TV. It won’t block your TV’s bottom edge or IR remote sensor
  • UPGRADE YOUR HOME THEATER EXPERIENCE – Watch your favorite shows on your 4K HD Smart TV with exceptional picture quality & crystal clear sound. With numerous connection possibilities, plug in any audio source via HDMI ARC, optical input & AUX
  • WIRELESSLY STREAM MUSIC from your favorite streaming apps like Pandora, Spotify, TuneIn, and others directly from your smartphone, tablet or other compatible device through the built-in Bluetooth technology
  • SET UP YOUR SOUND BAR IN MINUTES — With the included subwoofer, HDMI and optical cables quickly connect your TV to the sound bar. Get set up and listening in minutes

10. Klipsch R-12SW Subwoofer

  • Powerful 12″ copper-spun front-firing woofer
  • All-digital amplifier delivers 400 watts of dynamic power
  • Equally impressive with music and movies; Brushed black polymer veneer cabinet with satin painted plinth
  • Low pass crossover and phase control
  • Line/LFE inputs for compatibility with most receivers

Leave a Comment